The Lancer Tactical Hybrid Series sports the same ProLine internals but with a key difference. Instead of a full metal body, Hybrid AEGs come with nylon polymer upper and lower receivers, making your rifle lightweight yet solid. And unlike the Lancer Tactical G2 rifles, the Hybrid series AEG's feature a full metal railed hand guard. If you want the best of both worlds, Hybrid is the way to go. The 6.03mm stock tight bore barrel further increases range and FPS, and an injected polymer rotary style hop-up adjusts BB spin effortlessly for maximum precision. Upgraded with an 18:1 reinforced steel gear set to provide a quicker cycling rate and 8mm bushings to enhance the operational smoothness of your gears. These upgraded internals increase shot to shot consistency with minimal wear to your internals. The powerful 25k high torque motor is regulated to maximum efficiency with low resistance copper wiring and a bonus battery protection feature! When low voltage is detected from a drained battery, an automatic cut off keeps equipped batteries from draining completely, vastly increasing battery life and longevity. Replace your springs and alter your FPS without opening up your gearbox! A true quick change spring system enables adjustment from CQB to outdoor and back through unlocking the mechanism secured inside the buffer tube.
The Lancer "Fast Trigger": Lancer Tactical Hybrid Gen 2 AEGs also come fully equipped with the Lancer Fast Trigger just like the ProLine series. Modelled with a bladed flat trigger design, an ETU and a MOSFET all located within the gearbox, additional wiring has been reduced, amplifying trigger response. The Lancer Fast Trigger pushes about 20-25 RPS, and shoots consistently within a 2-3 FPS range.
The most important evolution of the new Proline Hybrid is undoubtedly its electronic trigger ETU GEN2: This trigger allows increased reactivity, a finer trigger stroke sensitivity, low voltage battery protection, complete gearbox cycles , a much faster start of shooting thanks to its cycle detection by magnetic sensor, etc ... a small revolution, always at affordable price.
- Lancer Tactical Engraved Metal Gearbox Cases
- Steel gears 18: 1 ratio (Gear piston specific to work with ETU GEN2)
- Bearings 8mm
- 14 teeth steel piston
- Red anodised cylinder for an improved surface finish
- Neodyn 25000rpm magnet hi-speed motor
- QD spring steel guide on bearings
- Spring M120
- Quick spring change (QD)
- Low resistance shielded wiring
- Hi-speed metal trigger
- ETU GEN2 electronic trigger block with protective mosfet integrated into the electronic card
- 16AWG shielded wiring (rear)
- 6.03mm precision barrel in polished brass
- Hop-up block with central wheel (Gen 2)
- 50 ° hop-up joint
- High density polymer body
- External metal barrel
- Fold-able sight in Nylon fibre
- Ergonomic metal trigger guard
- M-LOK aluminium hand guard
- Single point steel strap clip
- Skull stock with rubber butt plate
- Polymer stock tube
- False steel cylinder head
- Steel cocking lever with hi-speed handle
- Steel magazine retainer
- Metal fake bolt catch
- 300 rounds metal Hi-cap magazine
- Semi and full auto
- Double stick Lipo or Nimh battery (not included) fits on crane stock
- Weight : 2.4kg
- Colour : Black
- Energy : 1J
- Power : Approx 300FPS with 0.20g BB
We will endeavour to despatch your package within 24 hours although at peak times this may take slightly longer. Orders for RIFs may take 48 hours as we test and chronograph each rifle before shipping.
Our couriers only deliver Monday to Friday between the hours of 8am and 6pm (0800 - 1800 hours) except for local and national holidays. We do not directly control the couriers and we cannot obtain a specific delivery time from them. Delivery may be delayed by extreme weather and events and again is out of our control and accept no liability for delays caused by this.
Cost of Delivery
The cost of delivery will be added to your order total. You can select your preferred method of delivery from the options displayed at the checkout. Please select the correct option for your country to ensure that your order is not delayed.
We reserve the right to adjust shipping methods and costs but this is usually done in your favour and you will be informed by email.
Sage Pay’s systems are scanned quarterly by Trustwave which are an independent Qualified Security Assessor (QSA) and an Approved Scanning Vendor (ASV) for the payment card brands.
Sage pay is also audited annually under the Payment Card Industry Data Security Standards (PCI DSS) and is a fully approved Level 1 payment services provider, which is the highest level of compliance. We are also active members of the PCI Security Standards Council (SSC) that defines card industry global regulation.
PayPal protects your financial information with industry-leading security and fraud prevention systems. When you use PayPal, your financial information is not shared with the merchant. Once your payment is complete, you will be emailed a receipt for this transaction.